| Specifications | Two-Seat |
| Front Travel | 21 Inches |
| Rear Travel | 18 Inches |
| Wheel Base | 105 Inches |
| Length | 136 Inches |
| Front Width | 80 Inches |
| Rear Width | 80 Inches |
| Interior Width | 51 Inches |
| Height | 60 Inches |
Standard Features
• 1300cc Suzuki Hayabusa Engine
• MIG Welded 1 1/4″ Chromoly Frame
• 4130 Chromoly A-Arms
• 4340 Chromoly Rear Trailing Arms w/ Lifetime Warranty*
• 4130 Axles
• Chromoly Heim Joints
• 4340 Chromoly Front Spindles w/ Lifetime Warranty*
• Billet Aluminum Hubs w/ Tapered Bearings
• Rear Center Drive w/ Flanges
• Polished 930 CV Joints, Boots and Flanges on Micro Stubs
• Jamar Controls w/Stainless Braided Lines
• Tom Pro Rear Disk Brake w/ 4 Piston Brake Caliper
• King 2″ Coil-Over Shocks w/Piggyback Reservoirs
• 1/2″ Wheel Studs Front/Rear
• Chrome Acorn Lug Nuts
• Front and Rear Tie-Down Eyes
• 5’ Lighted Safety Whip
• Quick Release Steering Wheel Coupler
• Grant Steering Wheel
• Steering Shaft w/ U-Joints
• Billet Aluminum Rack and Pinion
• PRP Suspension Seats
• Crow 3″ 5-Point Safety Harnesses
• TPD Aluminum Adjustable Peddle Slide
• Aluminum Driver & Passenger Footrests
• Aluminum Floor
• Aluminum Fuel Tank – 7 Gallon
• Aluminum Firewall – Powder Coated
• Aluminum Hood & Dash (Type III Only)
• Enclosed Front Lower Panels (Type III Only)
• Tail Lights (2)
• Oil Cooler with Stainless Braided Lines
• Ron Davis Radiator (2 Row) with Shroud and Fan
• H.P.C. Coated Header
• SuperTrapp Stainless Steel Muffler
• Powder Coated Frame
• Full Assembly
• Grade 8 Bolts
• All Wiring Soldered and Shrink Tubed and Relays for All Components
Available Options
(Prices Include Installation)
| Option | Price |
| Turbo Kit (Water Cooled, Ball Bearing) | $4,400 |
| Lock-Up Clutch (Recommended for Turbo’s) | $870 |
| Intercooler | $550 |
| Intercooler Scoop | $425 |
| Dual Fuel System | $1,600 |
| Tom Pro Reverse Box | $3,300 |
| Reverse Shifter Kit | $180 |
| 3 Panel Aluminum Mirror | $120 |
| Eagle Eye HID Lights (Flood) | $620 pr. |
| Gauges | Call |
| Bead-Locks | $195 ea. |
| Tom Pro Front Brakes | $560 |
| Roof Rack | $400 |
| Front Skid-Plate | $100 |
| Rear Skid-Plate | $150 |
| Alternator Kit | $775 |
| Windshield | $1,300 |
| 30mm Countershaft + Backcut Trans. | $1,800 |
| PCI Car-To-Car Radio System | $1,500 |
| Powder Coated Aluminum Light-Bar | $620 |
| Billet Aluminum Dome Light | $100 |
| LED Tail Lights upgrade on Wing Trunk | $180 |
| Dual Whips | $125 |
| 2-Tube Bypass Shock Package | $2,600 |
| 3-Tube Bypass Shock Package | $3,100 |
| Billet Aluminum A-Arms w/ Bypass Shocks | $5,500 |
| Chrome Front-End | $1,500 |
| Chrome Rear Trailing Arms | $800 |
| “X” Tubing in Rear of Cage | $250 |
| “V” Tubing in Front of Cage | $150 |
| Electric Power Steering | $1,050 |
| Mid-Board Hubs | $1,500 |
*Lifetime Warranty is non-transferable and valid only for the original owner
Unassembled Kits = $14,500
• (1) MIG Welded 1 1/4″ Chromoly Frame
• (4) 4130 Chromoly A-Arms
• (2) 4130 Chromoly Tie-Rods
• (2) Knuckels
• (2) Billet Aluminum Front Hubs w/ Tapered Bearings
• (2) 4340 Chromoly Rear Trailing Arms
• (2) Rear Hubs
• (1) Steering Rack
• (1) Steering Shaft w/ U-Joints
• (1) Center Drive w/ 930 CV Flanges
• (2) Aluminum Side Panels
• (1) Aluminum Wing Trunk
• (1) Aluminum Firewall
• (2) Aluminum Floor Panels
• All 4130 Heim Joints
• All Grade 8 Hardware